The Kubota B8200 was one of the bestselling compact utility tractors in its day, first manufactured in 1983 and continued into the mid-90s.
There were a number of variants of it as a tractor, the most notable being the Kubota B8200F, Kubota B8200 DT, Kubota B8200E and Kubota B8200D.
These variants were tractors that were two wheel drive gear based, and four-wheel-drive gear based. There were also two variants of the tractor that tried to wheel drive and four-wheel-drive with a hydrostatic based system.
Kubota B8200 specs
The Kubota B8200 had a standard Kubota 0.9 L three cylinder diesel engine, which had a strong reputation as a powerful yet economical engine.
It had a fuel capacity of just over 5 gallons, and its hydraulic system had a capacity of just over 18 L.
The engine had a power output of 19/20 hp, a gear PTO of roughly 15 hp, Andy hydrostatic the show approximately 14/15.
The Kubota B8200 as a three-point which at the rear, with a rear lift of between 1000 and 1300 lbs approx. It has a wheelbase of just over 60 inches, and weighs between 1400 and 1600 lbs.
As mentioned above, could come as either a four-wheel-drive in two wheel drive, normally with manual steering, although power steering is optional on some models of tractor. It has a two post ROPS in place which offers the minimum safety protection.
Kubota B8200 for sale / prices
It is worth noting, that the Kubota B8200was mostly manufactured in Japan, unlike later models which are manufactured in the USA. This probably made slightly more expensive at the time of sale, where its list price was somewhere around US dollars 11,000.
Second-hand and used models of the Kubota B8200can be quite hard to find. Given the age of the tractor, careful attention should be paid to its mechanical condition.
As much detail should be gathered as possible as to its service history, as well as what type of land has been used on, and what type of work has been used for.
Kubota B8200 attachments
As with many Kubota tractors, the Kubota B8200has a wide range of attachments can be used with it, making it a very versatile agricultural machine.
The most common attachments include a mowing deck, a snow blower, a front end loader and a backhoe.
There are a number of other attachments, often made by third parties which can also add to its usefulness. these can include different types of backhoes, as well as different types and sizes of buckets.
Kubota B8200 parts
Parts for the Kubota B8200 are an important issue when buying any type of second-hand tractor. most common parts required normally relate to the clutch and transmission, the water system, the electrical system, the engine and the hydraulic system.
There are a wide range of manufacturer and aftermarket parts available, both from Kubota dealers and from aftermarket parts.
The important thing,is to know precisely which part is required before purchase, ideally to also know the part number.
This may take a bit of research, but is an essential part of making sure that the correct Kubota B8200 partis obtained and fitted correctly.
When looking for parts, it is often a good idea to try and obtain a copy of a pdf manual as well.
When buying parts for the Kubota B8200, it is a good idea if possible to have the chassis number of the machine, as well as being able to be as specific as possible as to which part is actually required.
This will help to track the part, and also help in locating a manual if needed which will contain diagrams for Kubota B8200 parts, and greatly help in being able to fit them properly.
Below are two different breakdowns of what parts may be available.
The first part is a breakdown of part by category, the second is a breakdown of parts by more specific motor or mechanical usage.
Category 1
3 Point Linkage / Drawbar/ Hitch – Kubota B8200 parts
- Lift Rod LH
- Lift Rod RH
- Lower link
- PTO shaft protector
- Stabiliser
- Swinging drawbar
- Top link
- Top link bracket
Air Conditioner – Kubota B8200 parts
- Air conditioning duct
- Air conditioner hose
- Compressor
- Condenser
- Dashboard air outlets
- Heater hose
- Inner air recirculation
- Mode case
Accessories and Service parts
Brake parts
- Brake
- Brake pedal
- Brake rod
- Parking brake lever
Cabin Parts
- Cab Bracket front
- Cab Bracket rear
- Cab Frame
- Door LH
- Doorlock LH
- Door lock RH
- Sender
- Fender cover
- Floor mat
- Front glass
- Hood rear
- Inner roof
- Near window
- Rear view mirror
- Seat
- Side window
- Toolbox
Canopy
Cargo and Storage Accessories
Chassis parts
Clutch parts
- Center frame
- Bevel gear
- Clutch release fork
- Clutch rod
- Differential rear
- Driveshaft
- First shaft
- Input shaft
- PTO clutch
- PTO clutch valve
- PTO propellor shaft
- PTO shaft
- Rear axle case
- Second shaft
- Shift cover
- Shuttle dear case
- Shuttle shaft
- Transmission case
- Clutch
- Clutch lever
- Clutch pedal
- Clutch housing
Cooling System parts
- Radiator
- Shutter
- Fan
- Reserve tank
- Water pipe
Cylinder Head
Electrical system parts
- Battery
- Alternator
- Dynamo
- Dynamo and van
- Light
- Regulator and meter
- Electrical wiring
- Hazard light/tail light touch
- Head light
- Panel board/switch
- Starter
- Switch
- Stop solenoid
- Tail light
- Working light
- Switch/sensor
Engine parts
- Accelerator lever
- Air cleaner
- Alternator
- Camshaft and idle gear shaft
- Cover
- Crankcase
- Cylinder head
- Dipstick and guide
- Exhaust manifold
- Fan
- Flywheel
- Fuel camshaft
- Gear case
- Governor
- Head cover
- Idle apparatus
- Injection pump
- Inlet manifold
- Lower gasket kit
- Main bearing case
- Muffler
- Nozzle holder
- Oil filter
- Oil pump
- Oil switch/thermometer
- Piston and crankshaft
- Speed control plate
- Starter
- Stop solenoid
- Kubota kit
- Valve and rocker arm
- Water flange and thermostat
- Water pump
Engine control parts
Filters and Maintenance
Frame Parts
Front axle parts
- Differential gear shaft
- Bevel gear case
- Knuckle shaft
- Engine support
- Front axle
- Front axle case
- Front differential
- Front differential case
- Front drive shaft
- Front frame
- Subframe
Fuel Sytem Parts
- Fuel pipe
- Fuel filler
- Sedimenter
- Separator
- Fuel filter
- Fuel tank
Hood / Bonnet – ROPS Parts
- Bonnet
- Bonnet side
- Center pillar
- Floor sheet
- Main frame
- Shutter plate
- Side cover
- Fender
- Front grille support
- Lever guide
- Manual holder
- Panel frame
- ROPS
- Seat
- Street support
- Step
- Step stay
Hitch and Drawbar
- Drawbar and hitch
- PTO shaft protector
Hydraulic system parts
- 3 point linkage
- Control valve
- Cylinder front cover
- Draft control valve
- Feedback lever
- Hydraulic oil line
- Hydraulic cylinder
- Hydraulic pump
- Lift arm
- Position control lever
- Top link bracket
Ignition Parts
Paint and Trim Parts
Pump Motor System
- Control valve
- 3 point linkage
- Feedback lever
- Oil tank
- Position control lever
- PTO valve
- Safety valve
- Hydraulic control lever
- Hydraulic cylinder
- Hydraulic oil line/delivery
- Hydraulic line/steering
- Hydraulic piston/lift arm
- Hydraulic pump
- Hydraulic pump/component parts
Rear axle parts
- Differential lock pedal
- Rear axle
- Rear differential
- Rear wheel
- Spiral bevel pinion
Rear PTO parts
Section part
Speed Change Lever
- Differential lock shift fork
- Frontwheel drive lever
- Main gear shift fork
- Main gear shift lever
- PTO gear shift arm
- PTO gear shift fork
- PTO gear shift lever
- PTO select lever
- Range gear shift fork
- Range gear shift lever
- Speed control pedal
Steering parts
- Steering controller
- Steering cylinder/component parts
- Steering handle
- Manual steering
- Steering linkage
- Steering post
- Tilt pedal
Top Link / Top Link Bracket / PTO Protector – Kubota B8200 parts
- Lift Rod
- 3 point linkage
- Check chain
- Hitch
- Lower link
- Mower rear link LH
- Mower rear link RH
- PTO protector
- Top link
- Top link bracket
- Toys and Merchandise
Transmission parts – Kubota B8200 parts
- Clutch shaft/output shaft
- Front wheel propeller shaft
- Countershaft
- Main shaft
- PTO counter shaft
- Reverse shaft
- Forward idle shaft
- GP idle shaft
- HST one – cylinder block
- HST two/arm
- HST 3/port block cover
- HST 4/oil cooler cover
- HST fan cover
- Mid PTO
- Propeller shaft
- PTO shaft
- Rear gear shaft
- Rear axle case
- Rear differential
- Transmission case
Wheel –
Category 2
Kubota B8200 Parts
Filters and maintenance – Kubota B8200 parts
- Air filter
- Engine oil filter
- Extended life antifreeze/coolant
- Filter maintenance kit
- Fuel filter – in line
- High-performance agricultural/construction equipment grease
- Hydraulic oil filter
- Hydraulic suction oil filter
- Lever action grease gun
- Engine oil
- Gear lubricant
- Synthetic universal hydraulic fluid
Cylinder head and component parts – Kubota B8200 parts
- Complete cylinder head
- Exhaust valve guide
- Inlet valve guide
Gauges and Instruments – Kubota B8200 parts
- Temperature gauge
Ignition parts – Kubota B8200 parts
- Glow plug
- Starter switch and key
Transmission parts – Kubota B8200 parts
- HST Damper
- Universal joint assembly
Electrical – Kubota B8200 parts
- Alternator
- Fuel shutoff solenoid
- Hazard lamp
- Headlight assembly
- Headlight lens
- Keys
- Kubota battery
- Oil pressure switch
- Re-manufactured starter
- Safety switch, seat
- Starter assembly
- Starter switch and keys
- Tail lamp
- Timer relay
- Turn Signal Lamp
Accessories and options – Kubota B8200 parts
- Mascot Mark
- Steering wheel spinnerKubota RTV 900 parts
- Trim
Engine gaskets and gasket kits – Kubota B8200 parts
- Gasket kit – upper
Tires and wheels – Kubota B8200 parts
- Tire Repair Kit
Operators compartment – Kubota B8200 parts
- Lever guide – RH
- Lever guide and cup holder LH
Mower Deck Parts – Kubota B8200 parts
- Dial Cam
Exhaust system parts – Kubota B8200 parts
- Exhaust manifold
- Exhaust manifold gasket
Cooling System Parts – Kubota B8200 parts
- Cooling fan
- Fan belt
- Lower radiator hose
- Radiator
- Radiator screen
- Thermostat
- Apart radiator hose
- Water pump
- Water pump gasket
Fuel system parts – Kubota B8200 parts
- Fuel cap – gasoline
- Fuel shutoff solenoid
- Re-manufactured injection pump
lubrication systems – Kubota B8200 parts
- Oil pump
- Oil pump gaskets
Steering and axles – Kubota B8200 parts
- Steering wheel
- Steering wheel cap
3 Point Hitch Parts – Kubota B8200 parts
- 3 Point category1 lower lift arm
- Category one top link
- Check chain assembly
- Clevis assembly
- lynch pin
- Turnbuckle
Toys and Merchandise – Kubota B8200 parts
- Kubota license plate
- Kubota mechanics gloves
FAQ
Kubota B8200 parts
Kubota B8200 Mower Deck Parts
Kubota B8200 Parts List
Kubota B8200 diagram
Kubota B8200 aftermarket parts
Kubota B8200 parts manual pdf
Kubota B8200 reviews / problems
With a tractor of this age, there are inevitably going to be a number of mechanical and maintenance issues that arise. Anyone buying a second-hand or used Kubota B8200 it is likely to be aware of these.
Most problems can normally be anticipated by doing some research online.
The best prices tractor forums and discussion groups on social media, and discussion forums such as tractor by net. There are normally a lot of very experienced and helpful people who are part of these followings, and are usually very keen to help.
Kubota B8200 manuals
Finding a manual for a Kubota B8200 should in theory be relatively easy, even allowing the age of the tractor. There are a number of very specific sites with available kubota manuals can be downloaded as a PDF.
There are also a number of sites that offer paid versions, and sites such as Amazon and eBay also often carry kubota manuals.
The other alternative is to check with a Kubota dealer as to what is the nearest tractor in terms of specifications and size that is currently available for sale, and use the manual for that tractor instead.
Although a slightly hybrid solution, it is possible to work this although it might be an idea to check any specific problems or issues with social media groups or discussion groups as mentioned above.
Kubota B8200 craigslist
Craigslist is a popular marketplace for a wide range of Kubota tractors, and is certainly well worth checking out.
Its main advantage and disadvantage is the same thing, that it covers a wide geographical area. this means is possible to search by area, which can both limit and expand the scope.
As with all second-hand mechanical equipment, remember that most of the sales are likely to be from private individuals, and all necessary checks should be done beforehand wherever possible.