There have been many attempts by manufacturers of all tractors including Kubota to standardise a number of the control mechanisms and levers that operate or allow an operator to use a Kubota tractor.
This standardisation applies to most modern day Kubota tractors, but care should be taken when operating an older version of a Kubota tractor to ensure that the controls are located in a manner that is understood by the operative of the tractor.
It is a golden rule when using any piece of machinery or operating any vehicle to fully understand the various controls that you need to be able to use. This is important both from a safety aspect, as well as from a simple point of view of be able to use the tractor effectively.
In order to do this a number of controls have been standardised. The brake control on a Kubota tractor, such as the Kubota B series B 2320 HST, will be a foot pedal, which will be located, or should be located on the right-hand side of the Kubota tractor.
In addition there may be a handbrake, which is a leader which would have to be pulled to be engaged, and could be located on either the left-hand or right-hand side of the Kubota tractor
Clutch control is normally by way of a foot pedal. This should be located on the left-hand side of the floor space underneath the steering column or steering wheel of the Kubota tractor.
It is possible that there is a hand operated clutch mechanism, and this may be located on either the right or left hand side of the Kubota tractor if a hand operated clutch is fitted, it must be moved towards the driver in order to be disengaged.
The control layout for floor pedals is similar to that used in a manual or stick shift automobile.
A power takeoff control system is most likely to be a hand operated system, and can be located on either side where the driver sits in the control system of the Kubota tractor.
